Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. F-150
    4. : How to replace the rear light bulb on the Ford F-150?

Ford F-150 - Video tutorial

Model: Ford F-150 MK 13 - Years 2015-2020
Part: Rear light bulb
Operation: How to replace the rear light bulb on the Ford F-150?

In order to replace the rear light bulb of the Ford F-150 you have to go to lower the tailgate of the rear compartment, so that you have access to the screws located next to the headlights. Once these screws have been loosened, it will be possible to remove the headlight from inside its housing and it will also be possible to disconnect the rear connector. In this way you will be able to remove the old bulb, replacing it with a new spare part: once the new bulb has been inserted, you can connect the connector and fix the headlight again with its screws.


Posted on 13 September 2022 by ScegliAuto



How to remove the rear light in the Ford F-150?
Ford F-150 (2015-2020 / MK 13) In this tutorial we can see how to remove the rear light in the Ford F-150 pickup, in case we need to replace a faulty bulb or the headlight itself.
How to replace the rear taillight bulb of the Ford F-150?
Ford F-150 (2009-2014 / MK 12) In the following mini guide, we will discover the steps to follow in order to properly and safely replace the rear headlight bulb. First of all, park
Ford F-150 headlight bulb replacement
Ford F-150 (2009-2014 / MK 12) Let's see in this guide how to remove and replace the headlight bulb of the Ford F-150, in simple and quick steps. First of all we open the bonnet an

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos