Do it yourself
| ||||
|
Ford Fiesta - Video tutorial
Model: Ford Fiesta
MK V, Fiesta 5, MK 5
- Years 2002-2008 To replace the battery of a Ford Fiesta 5 1.4 TDCi car we will first have to get into the car to pull the hood release lever. After opening the engine compartment, we secure the hood by fixing it through the special rod and locate the battery, located to the right of the engine compartment. With a 10 mm socket wrench we unscrew the battery support bar and move it; then we continue by disconnecting first the negative terminal and then the positive one. At this point we can extract the battery; clean the inside of the clamps by scraping with sandpaper to remove the oxide present. We take the new battery, remove the protections and sprinkle the terminals with copper grease to improve contact with the cables and avoid oxidation. Finally we insert the new battery and with the socket wrench 10 and screw first the positive terminal and then the negative one. Finally we screw the battery support bar on top of it.
Posted on 15 September 2022 by ScegliAuto
How to replace the thermostat on the Ford Fiesta 1.4 tdci?
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) In order to replace the Ford Fiesta 1.4 TDCi thermostat, the hood must be opened to gain access to the engine compartment. Once the hood has been ope
Ford Fiesta 1.4 TDCi camshaft sensor replacement
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) Let's see in this video how to remove and replace the camshaft rpm sensor on a Ford Fiesta 1.4 TDCi. First of all we open the bonnet of our car and w
How do you replace the injectors on the Ford Fiesta 1.6 TDCi?
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) In order to replace the injectors of the Ford Fiesta 1.6 TDCi you have to go to open the hood, so that you can have access to the components in the u Other guides that may interest you |
Frequently Asked QuestionsDisassembly of the gear knob on the Lancia Ypsilon 2Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.055
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |