Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Centre Console Trim in the Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Checks and maintenance

This tutorial shows how to replace the centre console trim in the Ford Fiesta, a very simple and quick operation. First, unscrew the knob and detach the gear lever gaiter from the base, then, using a plastic spatula to avoid leaving marks, unclip the panel where the airbag light is located and continue with the trim, starting from the top and following the entire perimeter. Once fully unclipped, disconnect the rear connectors, remove the switch panel, and fit the replacement by following the reverse procedure.

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Centre Console on a Ford Fiesta
How to Remove the Centre Console on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today's guide will show you the instructions to remove and replace the centre console on a Ford Fiesta by following these simple steps. First, get in…
Replacing the Radio in a Ford Fiesta
Replacing the Radio in a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Replace the radio in a Ford Fiesta. Start by removing the trim around the instrument panel with a plastic lever (these are the air vents) and detach …
Removing the Centre Console on the Fiesta
Removing the Centre Console on the Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) You will see the removal of the centre console of a Ford Fiesta with all the associated parts. To begin, detach the protective trim around the gear l…

    Frequently Asked Questions

    • Fiesta 2008-2017 - What problems does the Ford Fiesta 1.4 TDCi have when accelerating? Read answer
    • Fiesta 2008-2017 - What does MCA mean on a Ford Fiesta? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos