Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Console of a 2010 Ford Kuga

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Checks and maintenance

The first step to dismantle the console of your 2010 Ford Kuga is to remove the central part of the console below the radio, followed by the radio itself. To do this, use the appropriate tools that will fit into the 4 holes on the front of the radio. Disconnect the electrical and antenna cables and remove the 4 screws inside. At this point, unclip the 4 clips inside the space left by the radio. Take care during this process. Then, from the top, try to detach the outer cover using a flat screwdriver or a lever.

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the handbrake in the Ford Kuga?
How to adjust the handbrake in the Ford Kuga?
Ford Kuga (2012-2019 / C520, MK 2) In this tutorial, we can see how to adjust the handbrake in the Ford Kuga, a very simple and quick operation. First of all, park the vehicle on a fla…
Removing the Radio on a 2020 Ford Kuga
Removing the Radio on a 2020 Ford Kuga
Ford Kuga (2020-2026 / MK 3) In today's video, you will see how to remove and replace the radio, and thus the entire multimedia system, on the third generation Ford Kuga (2020), …
Where to Find the OBD Port on the 2014 Ford Kuga
Where to Find the OBD Port on the 2014 Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) If you need to connect a professional diagnostic tool to your 2014 Ford Kuga but don't know where it is, don't worry because below you will find all …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos