Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up the Antifreeze in a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Antifreeze coolant

See other generations:
Video tutorial

To top up the antifreeze in a Ford Fiesta, first open the bonnet. The coolant reservoir is located on the left side of the engine bay (when facing the front of the vehicle), in a semi-transparent container that shows the colour of the liquid, which can be blue, red, or yellow.

You can mix yellow with red, but do not mix blue with the other colours, as they are chemically different. There is a tutorial available that explains this in detail.

Unscrew the cap and pour in the corresponding coloured liquid until the level reaches the "max" mark.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How to Replace the Radiator Fluid in a Ford Fiesta
How to Replace the Radiator Fluid in a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In this tutorial, you will learn how to replace the coolant in a Ford Fiesta by following the instructions below. First, open the bonnet of your car …
How to Dismantle Radiator Expansion Tank on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) How to dismantle the coolant expansion tank? Let's see how to dismantle the tank in the engine compartment of a Ford Fiesta. Lift the front bonnet to…
Replacing the Coolant in a Ford Fiesta Radiator
Replacing the Coolant in a Ford Fiesta Radiator
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) Let's look at the removal and replacement of the coolant in a Ford Fiesta radiator. Disconnect the radiator hose at the bottom using a socket wrench …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos