Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Ford Mondeo

Model: Ford Mondeo / Fusion MK 3 - Years 2007-2014
Part: Service warning light

In this video tutorial, discover how to reset the engine oil maintenance light on a Ford Mondeo, model produced from 2007 to 2014. Let's proceed immediately; first, press and hold the accelerator pedal and the brake pedal down to the floor. At this point, turn on the vehicle's instrument panel without starting the engine; now you will see on the information display that the service light reset is in progress. Keep both pedals pressed for a few seconds until the reset is complete; once finished, release the pedals and confirm to finish the job.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Ford Mondeo
How to Reset the Service Light on a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) The following steps will show you how to reset the maintenance service light on a Ford Mondeo. First, get inside the vehicle and start the instrument…
How to reset the service light on the 2012 Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) To reset the service light on a 2012 Ford Mondeo, we must: - turn on the instrument panel; - press the OK button on the steering wheel; - select the …
How to Reset the Service Light on a Ford Mondeo
How to Reset the Service Light on a Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) In this brief tutorial, see the procedure to reset the service light using a button combination on a Ford Mondeo, produced from 2014 to 2021. First, …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos