Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seats from a Ford Transit Connect

Model: Ford Transit MK 8 - Years 2014-2024
Part: Seat

Below are the main instructions to help you remove the rear seats from a Ford Transit Connect by following these simple steps. First, open the rear doors and the boot; to remove the rear seats, it is necessary to unscrew all the screws found on the seat tracks using a ratchet torx spanner, as shown in the video. At this point, remove all the seats and backs, increasing the space inside the vehicle; if necessary, refit the new rear seats by applying the reverse procedure!

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box of the 2018 Ford Transit Connect
Where to Find the Fuse Box of the 2018 Ford Transit Connect
Ford Transit (2014-2024 / MK 8) If one or more fuses in your 2018 Ford Transit Connect are blown and you want to replace them, follow the instructions in this mini guide to easily l…
How to remove the third row of seats from the Ford Transit Connect
How to remove the third row of seats from the Ford Transit Connect
Ford Transit (2014-2024 / MK 8) This guide provides instructions for removing and replacing the third row of rear seats in the Ford Transit Connect. First, open the rear doors and g…
Where are the fuses located on the Ford Transit Connect?
Where are the fuses located on the Ford Transit Connect?
Ford Transit (2006-2014 / MK 7) On the Ford Transit Connect, the fuses are contained within dedicated fuse boxes installed on the vehicle: in this type of vehicle, you can find two …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos