Do it yourself
| ||||
|
Ford Transit - Video tutorial
Model: Ford Transit
MK 8
- Years 2014-2023 We see in this guide the instructions that will allow us to remove and replace the third row of the rear seats of the Ford Transit Connect. First we open the rear doors and get on board the car; to remove the rear seat it is necessary to unscrew the fixing screws that we find on the seat guides, using a T50 torx wrench, as shown in the video. At this point we remove the seat from the car, thus increasing the load volume of the trunk; in the same way we go to disassemble, if necessary, the other seats, applying the reverse procedure for reassembly!
Posted on 1 November 2022 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.014
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |