Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Armrest of the Ford Transit Connect

Model: Ford Transit MK 8 - Years 2014-2024

In this brief and simple guide, discover how to remove and replace the armrest of the front seats in the Ford Transit Connect. First, get inside the vehicle and start by releasing the metal ring or clip found between the armrest and the seat; use a small flat screwdriver for this, as shown in the video. At this point, you can remove and replace the armrest with the new one, inserting the clip to secure the armrest onto the pin; check the proper functioning of the armrest by following the video to the end!

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box of the 2018 Ford Transit Connect
Where to Find the Fuse Box of the 2018 Ford Transit Connect
Ford Transit (2014-2024 / MK 8) If one or more fuses in your 2018 Ford Transit Connect are blown and you want to replace them, follow the instructions in this mini guide to easily l…
Where are the fuses located on the Ford Transit Connect?
Where are the fuses located on the Ford Transit Connect?
Ford Transit (2006-2014 / MK 7) On the Ford Transit Connect, the fuses are contained within dedicated fuse boxes installed on the vehicle: in this type of vehicle, you can find two …
How to adjust the handbrake of the Ford Transit Connect
How to adjust the handbrake of the Ford Transit Connect
Ford Transit (2006-2014 / MK 7) Today we will discover the main instructions that will allow us to adjust the handbrake lever of the Ford Transit Connect. First of all, we get on bo…

    Frequently Asked Questions

    • Transit 2014-2024 - What should be the torque of the rear hub nut of the Transit? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos