Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Position the Jack in a Ford Transit Van?

Model: Ford Transit MK 8 - Years 2014-2024
Part: Checks and maintenance

In this tutorial, you will learn how to position the jack in a Ford Transit van, useful for example when you need to replace a flat tyre. Following these points is crucial for the correct lifting of the vehicle. For the rear, the first point is located right in front of the right wheel, precisely in front of the suspension mounting. At the front, it is found to the right of the joint between the exhaust manifold and the single pipe. Of course, the same points are also in the same position on the opposite side of the vehicle.

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter in the Ford Transit Van?
How to Replace the Cabin Filter in the Ford Transit Van?
Ford Transit (2006-2014 / MK 7) This tutorial shows how to replace the cabin filter in the Ford Transit van, a simple and quick operation. The filter in this model is located inside…
How to Dismantle the Sliding Door on a Ford Transit Custom Van?
How to Dismantle the Sliding Door on a Ford Transit Custom Van?
Ford Transit (2014-2024 / MK 8) In this tutorial, see how to dismantle and replace the side sliding door on the Ford Transit Custom van, a very simple and quick operation, preferabl…
How to Replace the Fuel Filler Flap on a Ford Transit Van
How to Replace the Fuel Filler Flap on a Ford Transit Van
Ford Transit (2014-2024 / MK 8) In this tutorial, we will see how to replace the fuel filler flap on a Ford Transit van, an extremely simple and quick operation. First, open both th…

    Frequently Asked Questions

    • Transit 2014-2024 - How do you access the secret menu of the Ford Transit Custom? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos