Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Pedal Covering

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Accessory kit

See other generations:
Video tutorial

There are many aftermarket pedal cover kits available, with various finishes that will give the vehicle the appearance of a true sports car once installed. To attach the covering plates, it is necessary to drill holes in the original pedals after removing the rubber cover: the holes can be made directly on the vehicle without removing the pedals (the accelerator pedal is easy to remove, so it could also be taken off). Once the rubber cover is removed, position the covering plates and mark the hole positions with a marker, drill the holes, and secure the plates with the corresponding pins.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Replacing Accelerator Pedal Position Sensor
Replacing Accelerator Pedal Position Sensor
Ford Focus (2004-2011 / MK 2, Focus 2) The accelerator pedal position sensor is integrated into the pedal itself, and to replace it, you need to change the entire pedal: the replacement is…
How to Remove the Clutch Pedal from a Ford Focus
How to Remove the Clutch Pedal from a Ford Focus
Ford Focus (2011-2018 / MK 3) Start by entering the cabin, specifically the driver's seat. Proceed to remove the carpet in the lower area of the pedal box. Next, disconnect the cl…
Removing Brake Pedal Switch
Removing Brake Pedal Switch
Ford Focus (1998-2004 / MK 1) The switch mounted at the brake pedal allows the rear stop lights to illuminate when the pedal is pressed: it is generally a normally closed switch, …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos