Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Brake Pedal Switch

Model: Ford Focus MK 1 - Years 1998-2004
Part: Checks and maintenance

The switch mounted at the brake pedal allows the rear stop lights to illuminate when the pedal is pressed: it is generally a normally closed switch, meaning when the button is released (brake pedal pressed), the switch keeps the circuit closed, turning on the lights; when the button is pressed (brake pedal released), the circuit opens and the lights turn off. The switch is fixed to a bracket above the brake pedal: to remove it, simply rotate it clockwise to disengage, extract the safety pin, and disconnect the connector.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Brake Light Switch
Replacing the Brake Light Switch
Ford Focus (2011-2018 / MK 3) This video explains how to remove and replace the brake light switch on a Ford Focus. Once you locate the brake pedal, it will be easy to find the sw…
Removing Brake Light Switch on Ford Focus MK3
Removing Brake Light Switch on Ford Focus MK3
Ford Focus (2011-2018 / MK 3) In today's tutorial, you will learn how to remove and replace the brake pedal switch on a Ford Focus MK3 in simple steps. First, open the front door …
How to Replace the Brake Light Switch on a Ford Focus MK3
How to Replace the Brake Light Switch on a Ford Focus MK3
Ford Focus (2011-2018 / MK 3) In this video tutorial, you will learn how to remove and replace the brake light switch on a third-generation Ford Focus by following these simple st…

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 2004-2011 - Where is the outside temperature sensor of a Ford Focus located? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos