Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset a Ford Focus.

Model: Ford Focus MK 3 - Years 2011-2018
Part: Warning light – error code

To reset a Ford Focus, follow these simple steps. Start by turning the key to switch on the ignition (without starting the engine). At this point, you will see the reset message on the display. Press and hold the accelerator pedal and the brake pedal simultaneously for 15 seconds. When the procedure is complete, a specific message will appear on the display, and you can then release the pedals. The reset operation will be finished, and you can switch off the ignition.

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the ECU on the Ford Focus?
How to reset the ECU on the Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) To reset the ECU on the Ford Focus, open the bonnet to access the engine compartment: on the right side, you will find the battery. The two terminals…
How to Reset the "Service" Light on a Ford Focus
How to Reset the "Service" Light on a Ford Focus
Ford Focus (2011-2018 / MK 3) Before you can start, sit in the driver's seat of your Ford Focus. Begin by pressing and holding the brake and accelerator pedals, while activating t…
Air filter replacement for Ford Focus MK3.
Air filter replacement for Ford Focus MK3.
Ford Focus (2011-2018 / MK 3) To replace the air filter that feeds the injection system of the Ford Focus, we open the hood of the engine compartment, and we find the filter box o…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - How to find the radio code of the Ford Focus 6000 CD? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos