Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery in a Ford C-Max Key

Model: Ford C Max MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

To replace the battery in the remote key of the vehicle, follow these simple steps: locate a slot on the side of the key where you can insert a small screwdriver to pry open the key. Once the key is open, locate the battery compartment and, using the same screwdriver, lift the battery out of the compartment.

At this point, take the new battery (model CR 2032) and place it in the compartment, ensuring the positive pole is facing upwards.

Finally, close the key by reattaching the two halves that make it up.


Updated on 24 June 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Ford C-Max
How to Replace the Key Battery on a Ford C-Max
Ford C Max (2010-2019 / MK 2) .. have reached the dead battery of your Ford C-Max key. Proceed to extract the battery from the key, and the disassembly will be complete. To install.. …
How to replace the battery of the Ford C Max remote control
How to replace the battery of the Ford C Max remote control
Ford C Max (2010-2019 / MK 2) The Ford C-Max remote control requires a CR 2032 3-volt battery to function properly. To replace the remote battery, we need to detach the two sides …
How to replace the battery of the Ford C-Max 2 key
How to replace the battery of the Ford C-Max 2 key
Ford C Max (2010-2019 / MK 2) Thanks to the steps described in this new guide, you will be able to replace on your own and correctly the small battery inside the key of your secon…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos