Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air vent located on the roof of the Ford Endeavour

Model: Ford Endeavour MK 2 - Years 2016-2023
Part: Body

It may happen that the air vent of the air conditioning system gets stuck closed due to a broken adjustable vane. Here’s how to replace this vent. Get two very small flathead screwdrivers and locate the two holes on the frame of the vent. Insert the two screwdrivers into the small holes and turn the vent counterclockwise; at that point, you can pull it out. Then take the new vent, position it in the housing, and turn it clockwise to secure it using the two small screwdrivers.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Windshield of a Ford Endeavour
How to Replace the Windshield of a Ford Endeavour
Ford Endeavour (2016-2023 / MK 2) This guide provides the main instructions on how to remove and replace the front windshield of a Ford Endeavour. First, get inside the vehicle and st…
How to Install Electric Running Boards on the Ford Endeavour
How to Install Electric Running Boards on the Ford Endeavour
Ford Endeavour (2016-2023 / MK 2) In this video, we show you how to install electric running boards on the Ford Endeavour. Installing electric running boards on the Ford Endeavour may…
How to Replace the Sync Multimedia System in the Ford Endeavour
How to Replace the Sync Multimedia System in the Ford Endeavour
Ford Endeavour (2016-2023 / MK 2) Today, in this short and simple guide, we will cover the main instructions on how to disassemble and replace the Sync 2 multimedia system with the Sy…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos