Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the BMS Light on a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Warning light – error code

In today's video, see how to reset the BMS light on the third generation Ford Focus. First, turn on the instrument cluster. Press the fog light button ten times. Similarly, press the hazard light button in the centre ten times. After a few seconds, the light will disappear from the instrument cluster. This light may come on after the vehicle has been stationary for long periods or if the battery has been disconnected. If it appears abnormally, visit a garage to check for any specific issues affecting your vehicle.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the BMS Light on Ford?
How to Reset the BMS Light on Ford?
Ford Focus (2011-2018 / MK 3) To clear the BMS (Battery Management System) light from the instrument cluster of the Ford Focus, first ensure that the new battery is installed and …
How to reset the BMS of the Ford Focus
How to reset the BMS of the Ford Focus
Ford Focus (2011-2018 / MK 3) In this short guide, we will see the instructions that will allow us to reset the BMS of the Ford Focus, in simple and quick steps. First of all, we …
How do you reset the BMS module of the Ford Focus?
How do you reset the BMS module of the Ford Focus?
Ford Focus (2018-2025 / MK 4) The car visible in the video is a Ford Focus, the same one we will discuss regarding the reset of the bms module mentioned. This module is responsibl…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - How to find the radio code of the Ford Focus 6000 CD? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos