Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Focus
  6. : Front bumper removal instructions

Ford Focus - Video tutorial

Model: Ford Focus MK 1 - Years 1998-2004
Part: Front bumper
Operation: Front bumper removal instructions

In order to remove the front bumper it is also necessary to remove the headlights for this reason it is advisable to disconnect the battery; start with the disassembly of the cover which is fixed with two pins at the base, right next to the radiator seat, and two snap tabs at the top; then proceed with the removal of the headlights, considering that one of the pins is located under the mudguard; once the headlights have been removed, disconnect the indicator bulb holders and continue with the disassembly of the fixing pins of the bumper, unhooking it from the side supports and pulling it forward to complete its total removal.


Posted on 15 August 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos