Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing Front Bumper

Model: Ford Focus MK 3 - Years 2011-2018
Part: Front bumper

To remove the front bumper, first, you need to remove the front headlamps. Once the headlamps are removed, take off the clips that secure the wheel arch to the edge of the bumper, then those along the lower edge of the bumper itself and those attached to the grille. Next, disconnect the cable for the bonnet lock release, unclip the bumper from the lower edge of the wing, and the tabs of the trim that will come off with the bumper. Pull the bumper away from its location, disconnect the connector near the fog lamp, and complete the removal.

Updated on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Front Bumper on Ford Focus
Removing Front Bumper on Ford Focus
Ford Focus (1998-2004 / MK 1) Do you want to remove the front bumper from a Ford Focus? Lift the front bonnet and let's see how to remove the front bumper. Remove the central gril…
How to Replace the Front Bumper on a Ford Focus
How to Replace the Front Bumper on a Ford Focus
Ford Focus (2011-2018 / MK 3) Today, we will go through the necessary instructions to remove and replace the front bumper on a Ford Focus, following these simple steps. First, ope…
How to Remove the Front Bumper from the Ford Focus MK4
How to Remove the Front Bumper from the Ford Focus MK4
Ford Focus (2018-2025 / MK 4) In today's video, you will see how to remove the front bumper from the fourth series Ford Focus, from 2019, following the instructions below. First, …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos