Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Battery Warning Light in a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Warning light – error code

In today's video, see how to intervene after replacing the battery in the Ford Focus. It may happen that the corresponding warning light remains illuminated on the dashboard after performing this operation. This tutorial also applies to other models from the American manufacturer that have the same instrumentation. Follow these steps: - Turn the ignition to ACC; - Flash the main beam 5 times; - Fully press and release the brake 3 times. After these simple steps, the light should turn off, allowing you to proceed normally. Complete the job.

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Battery Warning Light of the Ford Focus
Resetting the Battery Warning Light of the Ford Focus
Ford Focus (2011-2018 / MK 3) In this video tutorial, you will learn how to reset the battery warning light (BMS) of the Ford Focus by following the instructions below. First, get…
Reset Battery Warning Light on Ford Focus MK3
Ford Focus (2011-2018 / MK 3) In this video tutorial, you will learn how to reset the battery warning light on a Ford Focus third generation. First, get inside the car and turn on…
How to Reset the Tyre Pressure Light on the Ford Focus 4
How to Reset the Tyre Pressure Light on the Ford Focus 4
Ford Focus (2018-2025 / MK 4) Watch this video to see how to reset the tyre pressure light on the fourth generation Ford Focus in simple steps; before resetting the light, ensure …

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - How to find the radio code of the Ford Focus 6000 CD? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos