Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Interval on a Ford Escape

Model: Ford Escape MK 4 - Years 2020-2026
Part: Warning light – error code

In today's video, learn how to reset the service interval parameter on your Ford Escape. Turn on the vehicle's ignition. Navigate through the onboard computer settings using the controls on the steering wheel until you find the corresponding setting. Once done, confirm to the vehicle that you want to perform the reset, and after a few seconds, the car will confirm that the operation has been completed. You can then finish your work by turning off the vehicle. This tutorial also applies to the European twin model, the Ford Kuga (third generation).

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil service on the Ford Escape?
How to reset the oil service on the Ford Escape?
Ford Escape (2020-2026 / MK 4) In this tutorial, we can see how to reset the oil service in the Ford Escape, an extremely simple and quick operation, to be carried out only after c…
How to reset the oil light on the Ford Escape 3
How to reset the oil light on the Ford Escape 3
Ford Escape (2013-2019 / MK 3) If you want to manually reset the oil engine light of your third edition Ford Escape, all you have to do is carefully follow the steps described in t…
How to Reset the Oil Light on a Ford Escape 3
How to Reset the Oil Light on a Ford Escape 3
Ford Escape (2013-2019 / MK 3) Manually resetting the engine oil light on your Ford Escape Mk3 (2013-2019) is very simple, and with the following guide, you will have no difficulty…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos