Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Ford Escape?

Model: Ford Escape MK 2 - Years 2008-2012
Part: Service warning light

The service light turns on when you have driven a high number of miles and the engine oil is therefore exhausted. When you see it on your dashboard, you need to perform a complete oil and filter change, and only then can you reset it. But how do you reset this light on the Ford Escape? The video shows us. After turning on the ignition, use the three buttons located at the bottom left to navigate through the menu options until you reach the one that says "oil life reset" and select it. Once here, simply press and hold the button indicated in the video until the value returns to 100%.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a 2015 Ford Escape
How to Reset the Service Light on a 2015 Ford Escape
Ford Escape (2013-2019 / MK 3) In this short video today, you will see how to reset the maintenance light on a 2015 Ford Escape MK3. This operation is really simple; you can do it …
How to Reset the Maintenance Light on a 2010 Ford Escape
How to Reset the Maintenance Light on a 2010 Ford Escape
Ford Escape (2008-2012 / MK 2) If the maintenance light on the instrument panel of your second-generation 2010 Ford Escape stays on, don't worry because you can easily reset it by …
How to reset the oil light on the Ford Escape 3
How to reset the oil light on the Ford Escape 3
Ford Escape (2013-2019 / MK 3) If you want to manually reset the oil engine light of your third edition Ford Escape, all you have to do is carefully follow the steps described in t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos