Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Escape
    4. : To reset the maintenance light on the 2010 Ford Escape.

Ford Escape - Video tutorial

Model: Ford Escape MK 2 - Years 2008-2012
Part: Instrument cluster
Operation: To reset the maintenance light on the 2010 Ford Escape.

If the maintenance light on the instrument panel of your second-generation Ford Escape (2010) continues to stay on, don't worry because you can easily reset it by following the following procedure. First, reach the driver's seat and press the ignition button twice consecutively. At the same time, hold down the "Reset" button located on the steering wheel and wait for the completion of the reset of the light. As soon as the light goes off, you can release the "Reset" button and the procedure is finally successfully completed.


Posted on 1 October 2023 by ScegliAuto



How to reset the engine oil change light on Ford Escape
Ford Escape (2008-2012 / MK 2) In this video tutorial you can see how you can reset the engine oil change light or the maintenance light on Ford Escape, following a few simple step
How to reset the Ford Escape 2015 service light
Ford Escape (2013-2019 / MK 3) In this short video today we are going to see how to reset the maintenance warning light on a 2015 Ford Escape MK3. Doing this operation is really ve
How to manually reset the Ford Escape 3 service light
Ford Escape (2013-2019 / MK 3) In our new mini guide dedicated to your Ford Escape third series (year 2013-2019) we will discover together how to manually reset the maintenance lig

    Frequently Asked Questions

    • Escape 2013-2019 - What does the Ford Escape coolant warning light mean? Read Answer
    • Escape 2013-2019 - What problems does the Ford Escape have on the ABS? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos