Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit Roof Bars on the Ford B-MAX?

Model: Ford B Max MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Roof rack bars

Video tutorial

As shown in this tutorial, fitting roof bars on the Ford B-MAX is an extremely simple and quick operation. First, unclip the trims located at the sides of the roof, preferably using a plastic spatula to avoid leaving any marks.

Then, remove the caps inside the fixing holes. Next, remove the portion of the seal necessary for the supports to fit securely, position the supports, and tighten the respective bolts.

At this point, simply attach the first bar and repeat the operation on the opposite side.


Updated on 27 June 2026 by ScegliAuto


Related tutorials

Fitting Roof Bars on Ford B-Max
Fitting Roof Bars on Ford B-Max
Ford B Max (2012-2018 / MK 1) Today, you will learn how to fit roof bars on a Ford B-Max by following these useful instructions. Various types of roof bars are available, differin…
How to Replace the Fan Resistor on a Ford B-Max
How to Replace the Fan Resistor on a Ford B-Max
Ford B Max (2012-2018 / MK 1) Before you begin, open the front passenger door of your Ford B-Max. Start by removing the panel located at the bottom of the centre tunnel. Next, dis…
How to Remove the Headrests on a Ford B Max
How to Remove the Headrests on a Ford B Max
Ford B Max (2012-2018 / MK 1) Learn how to remove the front headrest on a Ford B Max. This video explains the procedure: First, open the door and enter the rear of the car (rear p…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos