Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Focus
  6. : Radiator replacement instructions

Ford Focus - Video tutorial

Model: Ford Focus MK 1 - Years 1998-2004
Part: Radiator
Operation: Radiator replacement instructions

Before proceeding with this maintenance make sure that the engine is cold; then drain the coolant through the drain plug located under the radiator, disconnect the power supply socket of the cooling fan and unhook the relative support frame to be able to remove it; continue with the disassembly of the mask, apply some tear-off clamps to support the air conditioning condenser (which is the radiator that is in front of the coolant), disconnect the hoses from the radiator itself, remove the pins of the support bracket , disconnect the cable grommets and extract the radiator from below.


Posted on 16 August 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos