Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Attach the Explorer Logo on the Bonnet of a Ford Explorer

Model: Ford Explorer MK 5, U502 - Years 2011-2019
Part: Body

In this video, you will learn how to attach the Explorer logo on the bonnet of a Ford Explorer. Clean the surface where you intend to attach the logo thoroughly. Use masking tape to accurately outline the perimeter where you want to place the logo. Attach it in such a way as to leave the exact space for the logo and ensure it is straight for the most precise application possible. At this point, place the logo along the top line of the tape and secure it with two or three pieces of tape so that it does not move. Now, remove the backing from the rear of the logo and begin to attach it to the surface.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Ford Explorer?
How to Replace the Front Headlamp Bulb on a Ford Explorer?
Ford Explorer (2006-2010 / U251, MK 4) To replace the front headlamp bulb on a Ford Explorer, open the bonnet to loosen the bolts securing the headlamp at the top. Once these two bolts hav…
How to Replace the Front Headlight Bulb in a Ford Explorer?
How to Replace the Front Headlight Bulb in a Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) Replacing the front headlight bulb in the Ford Explorer is a very simple task; let’s see how to proceed in this tutorial. First, ensure the key is no…
How to Replace the Air Filter on a Ford Explorer
How to Replace the Air Filter on a Ford Explorer
Ford Explorer (2006-2010 / U251, MK 4) In today's video, see how to replace the air filter on a 2006-2010 Ford Explorer. First, open the front bonnet by pulling the relevant lever inside t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos