Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Kuga
  6. : How to reset the TPMS light in Ford Kuga

Ford Kuga - Video tutorial

Model: Ford Kuga MK 3 - Years 2020-2024
Part: Tires
Operation: How to reset the TPMS light in Ford Kuga

In today's video we see how to reset the TPMS light in the Ford Kuga. First of all we proceed by checking the tire pressure and its effective and correct value shown in the use and maintenance manual. Once this is done we can proceed by settling inside the passenger compartment. At this point we turn on our vehicle. Go to the on-board computer settings and confirm that you want to perform the operation. After a few seconds the car will have memorized the new pressure and you will be able to finish your work currently in progress. As you have seen, everything is very fast.


Posted on 9 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Kuga 2012-2019 - How do you reset the tire warning light in the Ford Kuga? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos