Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Spoiler on a Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Body

If you intend to customise your vehicle by replacing the rear spoiler with an aftermarket model, follow the instructions below and refer to the video as well. First, remove the screws securing the third brake light located on the spoiler and disconnect the connectors behind it. Then, lift the tailgate; there are screws behind the spoiler that need to be removed. This will allow you to take off the current spoiler. Next, take the new spoiler and position it over the fixing holes of the previous one, and proceed to reassemble everything.

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Tailgate Release Button on the Ford Fiesta
How to Replace the Tailgate Release Button on the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this guide, you will find instructions to remove and replace the tailgate release button of the Ford Fiesta's boot. First, move to the rear of the…
How to Remove the Rear Bumper of a Ford Fiesta
How to Remove the Rear Bumper of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before you can start, open the boot of your Ford Fiesta. Begin by unscrewing and removing the fastening bolts located in the rear wheel arches. Next,…
Removing the Rear Door of the Ford Fiesta
Removing the Rear Door of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this brief and simple guide, you will see the steps that will allow you to remove and replace the rear door of the Ford Fiesta. First, open the re…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos