Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Timing Belt on the Ford Fiesta 1.4 16v

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Timing belt

To replace the timing belt on the Ford Fiesta with the 1.4 16v engine, start by purchasing the Continental water pump kit with code CT881WP1 along with tool box V04. In the video, the engine and the cover protecting the gears where the belt runs have already been removed. After this procedure, remove the bolt at the bottom of the crankshaft and replace it with the locking tool (since the engine was set just before top dead centre, after fitting the tool, rotate the engine until it contacts the locking tool), then secure the camshaft. Rotate the tensioner pulley upwards until you can fit the stop pin. Replace the bolts on the camshaft gears using a counterhold, and when refitting, do not fully tighten them so they can rotate. Fit the timing belt starting from the crankshaft, moving counterclockwise, passing over the gears and then the tensioner pulley. Now remove the pin from the tensioner pulley to tension everything. At this point, you can tighten the camshaft gear bolts to a torque of 60 Nm. Finally, remove the locking tools, rotate the engine twice to check the timing, and reassemble everything.

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Hello, today's guide aims to replace the timing belt on our Ford Fiesta. Start by lifting the front of the vehicle, then remove the front right wheel…
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today, discover how to remove and replace the timing belt on the Ford Fiesta 1.5 TDCI. The manufacturer recommends replacing the timing belt every 10…
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this guide, we will see the instructions for disassembling and replacing the timing belt of the Ford Fiesta 1.0 Ecoboost; on this type of engine, …

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos