Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Armrest in a Ford Ranger Pickup?

Model: Ford Ranger T6, P375, PX - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, see how to remove the armrest located between the two front seats in the Ford Ranger pickup, a very simple and quick operation. First, go to the rear seat, then remove the end support of the centre tunnel using a plastic spatula to avoid leaving marks.

Next, lift the armrest, unscrew the two screws located at the sides of the hinge using a T20 Torx key, and separate it from the base. To fit a replacement, simply follow the reverse procedure.


Updated on 4 July 2026 by ScegliAuto


Related tutorials

How to Remove the Spare Wheel in a Ford Ranger Pickup?
How to Remove the Spare Wheel in a Ford Ranger Pickup?
Ford Ranger (2011-2023 / T6, P375, PX) In this tutorial, you will learn how to remove the spare wheel in a Ford Ranger pickup, a very simple and quick operation to perform in case of a pun…
How to reset the service light on a Ford Ranger?
How to reset the service light on a Ford Ranger?
Ford Ranger (2022-2026 / RA, P703) In this tutorial, you will see how to reset the service light on a Ford Ranger, a very simple and quick operation to perform only after completing al…
How to Remove the Steering Wheel Airbag on a Ford Ranger Pickup?
How to Remove the Steering Wheel Airbag on a Ford Ranger Pickup?
Ford Ranger (2011-2023 / T6, P375, PX) In this tutorial, you will see how to remove the steering wheel airbag on a Ford Ranger pickup. This operation is very simple and quick. Before proce…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos