Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel Airbag on a Ford Ranger Pickup?

Model: Ford Ranger T6, P375, PX - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Airbag

See other generations:
Video tutorial

In this tutorial, you will see how to remove the steering wheel airbag on a Ford Ranger pickup. This operation is very simple and quick.

Before proceeding, to avoid accidental activation, disconnect the negative terminal of the battery. Start by entering the cabin, then carefully pry off the upper cover of the steering wheel using a plastic spatula.

Next, rotate the steering wheel 90 degrees, unlock the securing clip accessible through the hole, and repeat the operation on the opposite side. At this point, you can separate the airbag from the support, disconnect the connector, and install the replacement if necessary.


Updated on 27 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light in the Ford Ranger Pickup?
How to Reset the Service Light in the Ford Ranger Pickup?
Ford Ranger (2022-2026 / RA, P703) In this tutorial, we will see how to reset the service light in the Ford Ranger pickup, a very simple and quick operation to be done only after compl…
How to Remove the Spare Wheel in a Ford Ranger Pickup?
How to Remove the Spare Wheel in a Ford Ranger Pickup?
Ford Ranger (2011-2023 / T6, P375, PX) In this tutorial, you will learn how to remove the spare wheel in a Ford Ranger pickup, a very simple and quick operation to perform in case of a pun…
What is the Fuse Diagram for the Ford Ranger Pickup?
What is the Fuse Diagram for the Ford Ranger Pickup?
Ford Ranger (2022-2026 / RA, P703) In this video, we can see where the fuse boxes of the Ford Ranger pickup are located and their respective diagrams, useful in case we need to check t…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos