Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to replace a bulb on the high beam or low beam headlights of the Ford Focus version MK2

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Light bulb
Operation: How to replace a bulb on the high beam or low beam headlights of the Ford Focus version MK2

Let's see how to replace the bulbs from the high beam or low beam headlights of a Ford Focus version MK2: with a screwdriver, unscrew the screws that hold the optical unit in place, on both sides. Once we have removed the whole assembly, we can remove the rubber caps which are positioned just in front of the bulbs. Remove the connector from its housing and remove the bulb from its housing. Let's replace it with the new one, remembering well that new bulbs must never be touched with bare hands. This is if we want them to last a long time. Put the electrical connector back in its place and close the rubber cap. Now we can reposition the optical group in its place and screw the two screws that hold the optical group in place on the two sides. Job finished.


Posted on 12 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Focus 2011-2018 - How to replace the sidelights bulb on the Ford Focus? Read Answer
    • Focus 2018-2025 - How much does the position light bulb cost for the Ford Focus? Read Answer
    • Focus 1998-2004 - What to do if the Ford Focus hood light does not come on? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos