Do it yourself
| ||||
|
Ford Kuga - Video tutorial
Model: Ford Kuga
MK 2, C520
- Years 2012-2019 This video tutorial shows the procedure for resetting the service warning light on a 2017 Ford Kuga. The procedure is as follows: press and hold down the brake and accelerator pedals simultaneously, turn on the ignition while holding down the pedals and hold them down for 20 seconds. Once the 20 seconds have passed, the car will reset and the procedure will be complete. This procedure can be used if the warning light stays on once the vehicle has been serviced. This procedure is simple and fast, it takes less than 1 minute to be performed and no specific tools or programs are needed.
Posted on 30 April 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |