Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Warning light – error code

This video tutorial shows the procedure to reset the service light on the Ford Kuga produced from 2012 to 2019. This procedure is useful if the light remains on after a service. To reset it, first, start the engine. Once the engine is running, press the OK button located on the left side of the steering wheel, then press the menu button. Scroll to settings, and by clicking the button to the right of the OK button, select settings and then driver assist. At this point, select tyre pressure and press the OK button for 3 seconds. After doing this, the reset will be complete.

Updated on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light (Engine Oil) on the Ford Kuga MK1
How to Reset the Service Light (Engine Oil) on the Ford Kuga MK1
Ford Kuga (2008-2012 / C394, MK 1) Discover the instructions on how to reset the service light for the regular maintenance oil change on the first generation Ford Kuga, in simple and q…
How to Reset the Service Light on a 2009 Ford Kuga
How to Reset the Service Light on a 2009 Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) Resetting the service light on a 2009 Ford Kuga is simple and takes less than a minute. First, turn off the car and the ignition. Once done, press th…
How to Reset the Service Light on a Ford Kuga
How to Reset the Service Light on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) After changing the engine oil on your vehicle, you need to reset the service light that has illuminated on the dashboard. You will find the instructi…

Other guides you may be interested in

    Frequently Asked Questions

    • Kuga 2012-2019 - What does the message "Fuel computer data error" indicate in the Ford Kuga? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos