Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Center Cup Holder of a Ford F350/F250

Model: Ford F-350 Phn131 - Years 1999-2007
Part: Dashboard

In the video, we see a Ford F250 pickup (the same applies to the F350) where the center cup holder is severely damaged. You can repair it with a bit of creativity. In the video, it was so ruined that they had to break it to remove it. Naturally, vacuum it and clean it well afterward. Although it is specified that it is not required, the video included two spacers for better adherence, which compensate for the middle layer that was removed here. He recovered the part from a junkyard, from a model similar to his own, that had good consistency and color of the plastic, and inserted the new piece. A perfect result with minimal cost.

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Starter Motor on a Ford F350
How to Replace the Starter Motor on a Ford F350
Ford F-350 (1999-2007 / Phn131) In today's video, you will learn how to remove and replace the starter motor on a Ford F350 by following these simple steps. First, lift the vehicle …
Diagram and Location of Fuse Boxes for Ford F350
Ford F-350 (1999-2007 / Phn131) In this video, see the diagram and placement of the fuse boxes in the Ford F350 Super Duty: the fuse panel is located at the lower left of the steeri…
How to Remove the Outside Rearview Mirror of the Ford F350 p473
How to Remove the Outside Rearview Mirror of the Ford F350 p473
Ford F-350 (2011-2016 / P473) This guide shows how to replace the outside rearview mirror of the Ford F350 Super Duty p473. First, unscrew the four screws securing the inner door …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos