Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Outside Rearview Mirror of the Ford F350 p473

Model: Ford F-350 P473 - Years 2011-2016
Part: Side mirror

This guide shows how to replace the outside rearview mirror of the Ford F350 Super Duty p473. First, unscrew the four screws securing the inner door panel and remove the plastic panel in the corner of the door. Disconnect the electrical wires and remove the piece. Disconnect the electrical cable of the mirror adjuster and unscrew the screws securing the mirror. Hold the mirror to prevent the assembly from falling. Install the new piece and reconnect all previously removed parts. Check the proper functioning of the mirror.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Side Mirror on a Ford F-350
How to Replace the Side Mirror on a Ford F-350
Ford F-350 (2017-2023 / P558) In this video, you will learn how to replace the side mirror on a Ford F-350. Start by removing the plastic panel using a trim tool. Disconnect the c…
How to Replace the Starter Motor on a Ford F350
How to Replace the Starter Motor on a Ford F350
Ford F-350 (1999-2007 / Phn131) In today's video, you will learn how to remove and replace the starter motor on a Ford F350 by following these simple steps. First, lift the vehicle …
How to Replace the Outside Rearview Mirror on the Ford F-350?
How to Replace the Outside Rearview Mirror on the Ford F-350?
Ford F-350 (1999-2007 / Phn131) To replace the rearview mirror on the Ford F-350, you need to detach the triangular plastic cover located at the mirror on the inside of the door. On…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos