Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Ranger
  6. : How to replace battery on Ford Ranger

Ford Ranger - Video tutorial

Model: Ford Ranger T6 - Years 2011-2023
Part: Battery
Operation: How to replace battery on Ford Ranger

If we need to replace the battery on this car model, we can take a look at the video tutorial and instructions below. Once the bonnet has been raised, locate the battery located on the left side behind the headlight. Using a socket spanner, unscrew the fastening nut of the support band in the battery, then proceed to disconnect first the negative pole and then the positive pole above which there is the pre-fuse box. Then proceed to lift the battery and extract it from the compartment and go to place the new one. Then proceed to reconnect the fastening band and then reconnect first the positive pole and then the negative one.


Posted on 20 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos