Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Climate Control Bulbs on the Ford KA

Model: Ford Ka MK 2 - Years 2008-2016
Part: Instrument panel light

In this short and simple guide, you will see the steps to disassemble and replace the bulbs for the climate control on the Ford KA. First, get inside the vehicle and start by removing the plastic cover of the gear lever; then unscrew the fixing screws of the plastic cover of the central instrument panel using a crosshead screwdriver, as shown in the video. At this point, remove the climate control knobs and replace the small bulb-type bulbs; then reassemble the entire instrument panel, applying the reverse procedure!

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlamp Bulbs on Ford Ka
Replacing Front Headlamp Bulbs on Ford Ka
Ford Ka (2008-2016 / MK 2) Replace the front headlamp bulb on a Ford Ka. Lift the bonnet and secure it. Remove the securing screws on either side of the headlamp, then remove t…
How to set the correct time on the Ford Ka 2014
How to set the correct time on the Ford Ka 2014
Ford Ka (2008-2016 / MK 2) In the following guide dedicated to all of you who own a second series Ford Ka (year 2014), we will explain the steps you need to take if you want to…
Replacing the Rear Light on a Ford Ka
Replacing the Rear Light on a Ford Ka
Ford Ka (2008-2016 / MK 2) Replace the damaged rear light on a Ford Ka. Open the boot lid, and using a screwdriver, remove the screws located at the side of the light (dependin…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos