Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Number Plate Bulb on a Ford Ka

Model: Ford Ka MK 1 - Years 1996-2008
Part: License plate light

How to install the bulbs in the number plate light of a Ka? Remove the rear light and replace the bulbs. Open and lift the boot lid, then remove the light from the rear tailgate. Disconnect the power connectors attached to the light and pull it out from its housing. Install the damaged bulbs with new ones (replace the light if damaged). Secure the light in the tailgate and lock the plastics. Test the operation of the number plate lights: turn on the ignition and switch on the headlights.

Updated on 27 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Ka (2008-2016 / MK 2) Here’s how to remove a front headlamp and replace the bulbs on a Ford Ka: open the front bonnet by pulling the lever located at the bottom right of t…
Ford Ka (2008-2016 / MK 2) In this short and simple guide, you will see the steps to disassemble and replace the bulbs for the climate control on the Ford KA. First, get inside…
Ford Ka (2008-2016 / MK 2) To replace the rear light bulb on the Ford Ka, open the tailgate of the boot to access the screws next to the light. By removing these screws, you ca…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos