Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the license plate light in the Ford Ka?

Model: Ford Ka MK 2 - Years 2008-2016
Part: License plate light

If you notice that your license plate light is burnt out, it is advisable to replace it as soon as possible to avoid fines and disputes. That being said, let's see how not only simple but also very quick it is to change a bulb like this in the Ford Ka: Get a small flathead screwdriver and use it to pry open the plastic cover of the small light fixture containing the bulb in question, to remove it. Once done, remove the bulb from its socket, take the replacement one, making sure it is similar in technical characteristics, and install it. Before closing the aforementioned cover, test the light.

Posted on 11 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Number Plate Bulb on a Ford Ka
Replacing the Number Plate Bulb on a Ford Ka
Ford Ka (1996-2008 / MK 1) How to install the bulbs in the number plate light of a Ka? Remove the rear light and replace the bulbs. Open and lift the boot lid, then remove the …
How to Replace the Number Plate Light Bulb on a Ford Ka
How to Replace the Number Plate Light Bulb on a Ford Ka
Ford Ka (2008-2016 / MK 2) Let's see how to replace the number plate light bulb on the first and second versions. You will need a W5W bulb, typical for interior and courtesy li…
How to Replace the Key Shell of a Ford Ka
How to Replace the Key Shell of a Ford Ka
Ford Ka (2008-2016 / MK 2) In this video, you will see how to replace the key shell of a Ford Ka. To start, as shown at minute 2:15, unscrew the screw visible on the side of th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos