Do it yourself
| ||||
|
Ford Ka - Video tutorial
Model: Ford Ka
MK 2
- Years 2008-2016 If the headlight bulb of the Ford Ka MK2 were to burn out, we must replace it as soon as possible mainly for our safety and also to avoid penalties. To do this, we open the hood of the engine compartment, stand in front of the headlight where the bulb to be replaced is located, disconnect the electrical connector, remove the rubber cap that protects the bulb, now using a cross-head screwdriver as short as possible, remove the two screws that hold the metal clamp that holds the bulb in place. Remove the old bulb and replace it with a new one, being careful not to touch the bulb with your fingers. Reassemble the other parts by proceeding in the opposite direction.
Posted on 29 February 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.056
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |