Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulb of the Ford KA

Model: Ford Ka MK 1 - Years 1996-2008
Part: Headlight bulb

Today, discover how to remove and replace the front headlight bulb of the Ford KA. To access the front headlight bulb, it will be necessary to remove the front wheel arch; then remove the plastic protective cap of the bulb by unclipping the metal clip and the electrical connector to take it out, as shown in the video. At this point, install the new bulb, ensuring it is the correct type and has the same fitting; secure it properly in the headlamp unit and reassemble the wheel arch, replacing the other dipped beam bulb in the same way!

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Ford Ka?
How to Replace the Front Headlamp Bulb on a Ford Ka?
Ford Ka (1996-2008 / MK 1) To replace the headlamp bulb on a Ford Ka, open the bonnet to access the components in the engine bay. Locate the corresponding front headlamp and de…
How to Replace the Front Headlamp Bulb on a Ford Ka
How to Replace the Front Headlamp Bulb on a Ford Ka
Ford Ka (1996-2008 / MK 1) Before you start, turn the front wheels of your Ford Ka fully to the left. Begin by unscrewing and removing the screws that secure the inner wheel ar…
How to Remove the Front Headlight on a Ford Ka
How to Remove the Front Headlight on a Ford Ka
Ford Ka (1996-2008 / MK 1) Before you start, open the front bonnet of your Ford Ka. Begin by unclipping and slightly moving the front wing near the headlight. Next, unscrew and…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos