Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front fog light bulb of the Ford Ka.

Model: Ford Ka MK 3 - Years: 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

Replacing the headlight bulb on a Ford Ka vehicle is a simple and quick task that can be done independently. To perform the replacement, we need to pull the hood release lever and position ourselves next to the headlight we want to work on. Press on the bulb connector to remove it, then take out the bulb holder by pulling the levers and rotate the bulb to extract it. Insert the new bulb by rotating it to the right, making sure the holder is secured, and then connect the connector.

Turn on the vehicle's lights to test the headlight; if everything is working properly, close the hood. If not, replace the fuse located in the box in the engine compartment.


Posted on 15 December 2025 by ScegliAuto


Related tutorials

Replacing the Front Headlight Bulb of the Ford KA
Replacing the Front Headlight Bulb of the Ford KA
Ford Ka (1996-2008 / MK 1) Today, discover how to remove and replace the front headlight bulb of the Ford KA. To access the front headlight bulb, it will be necessary to remove…
Replacing Front Headlamp Bulbs on Ford Ka
Replacing Front Headlamp Bulbs on Ford Ka
Ford Ka (2008-2016 / MK 2) Replace the front headlamp bulb on a Ford Ka. Lift the bonnet and secure it. Remove the securing screws on either side of the headlamp, then remove t…
How to Replace the Front Headlamp Bulb in the Ford Ka?
How to Replace the Front Headlamp Bulb in the Ford Ka?
Ford Ka (1996-2008 / MK 1) To replace the front headlamp bulb in the Ford Ka, open the bonnet to access the rear of the headlamp containing the bulb to be replaced. Remove the …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos