Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing LED Headlamp Bulb

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight bulb

See other generations:
Video tutorial

If you decide to replace the original headlamp bulbs, consider using LED bulbs instead of xenon kits. For this car model, you need to remove the headlamp for installation, but fortunately, disassembly is straightforward.

Once you have unscrewed the headlamp fixing screws, pull it away from its housing enough to detach the protective cap of the bulb holder, remove the original bulb, and install the LED bulb. Then connect the original socket to the ignition control unit.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

How to Install the LED Bulb in the Front Headlamp of the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To install the LED bulb in the front headlamp of the Ford Fiesta, open the bonnet and loosen the two screws securing the headlamp at the top. This wi…
How to Replace the Front Headlight Bulb on the Ford Fiesta
How to Replace the Front Headlight Bulb on the Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Today, we will explain how to replace the front headlight bulb on a Ford Fiesta, switching from a standard bulb to an LED. No modifications to the co…
Installation of LED Headlight Bulb
Installation of LED Headlight Bulb
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) When replacing the front headlight bulbs, note that the position light bulb (H1) can be changed without removing the headlight, while the dipped beam…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos