Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan in a Ford Focus?

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Blower motor

In this tutorial, you will see how to replace the cabin fan in a Ford Focus. Before proceeding, ensure that the key is not in the ignition for safety. Start by unscrewing the screw located in the lower left area of the dashboard, then remove the upper cover of the pedals and the panel at the junction with the centre tunnel. Next, remove the passenger glove compartment, unclip the fuse box, and locate the fan, which is situated just above it. To remove it, disconnect the connector and unscrew the relevant screws. Fit the replacement by simply following the reverse procedure.

Updated on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Cabin Fan on Ford Focus
Removing the Cabin Fan on Ford Focus
Ford Focus (2011-2018 / MK 3) Learn how to remove the cabin fan on a Ford Focus. The cabin ventilation fan is located directly under the dashboard. Unscrew the securing screws on …
Removing Heating Fan from Ford Focus
Removing Heating Fan from Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this video tutorial, you will learn how to remove the heating cabin fan from a Ford Focus. First, remove the glove compartment: unclip the levers …
Replacing the Cabin Fan Resistor on a Ford Focus
Replacing the Cabin Fan Resistor on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today's steps will show you how to remove and replace the cabin fan resistor on a Ford Focus. First, get inside the vehicle on the front passenger si…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2011-2018 - Why is the fan of the Ford Focus not working? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos