Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the cabin fan from a Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part: Blower motor

This video shows the steps to remove the cabin fan from a Ford Focus, useful if it is malfunctioning. First, remove the side panels of the centre tunnel on both sides, then from the driver's side, disconnect the power connector of the fan. Next, remove the glove compartment on the passenger side along with the bracket containing the fuse box. Finally, proceed to remove the fan by taking out the 3 Torx T20 screws.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Cabin Fan on Ford Focus
Removing the Cabin Fan on Ford Focus
Ford Focus (2011-2018 / MK 3) Learn how to remove the cabin fan on a Ford Focus. The cabin ventilation fan is located directly under the dashboard. Unscrew the securing screws on …
Removing Heating Fan from Ford Focus
Removing Heating Fan from Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this video tutorial, you will learn how to remove the heating cabin fan from a Ford Focus. First, remove the glove compartment: unclip the levers …
Replacing the Cabin Fan Resistor on a Ford Focus
Replacing the Cabin Fan Resistor on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today's steps will show you how to remove and replace the cabin fan resistor on a Ford Focus. First, get inside the vehicle on the front passenger si…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2011-2018 - Why is the fan of the Ford Focus not working? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos