Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to replace fog lights in a Ford Focus?

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Fog lights
Operation: How to replace fog lights in a Ford Focus?

In this video we will see the procedure for replacing a fog light bulb on our Ford Focus. First, we need to remove the cover in front of the fog light we are interested in, starting from the top and then moving to the bottom. Now we can unscrew the two screws that hold the light attached, using a screwdriver. From here, we pull out the light, detach the contacts, and pull out the old bulb. It is important not to touch the glass of the bulb during this operation. In the video, the old bulb was replaced with LED bulbs. In any case, the procedure is the same: once the old bulb is removed, we insert the new one by attaching the respective contacts and reinserting it into the fog light.


Posted on 17 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Focus 2011-2018 - How do the Ford Focus fog lights come on? Read Answer
    • Focus 2018-2025 - How do the Ford Focus fog lights come on? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos