Do it yourself
Frequently asked questions about cars and motorcycles

Where is the oil filter located in the Ford Explorer?

Model: Ford Explorer MK 5, U502 - Years 2011-2019
Part: Oil filter

In this video, you can see where the oil filter is positioned in the Ford Explorer. As shown, it is located in the typical position underneath the vehicle, right next to the exhaust pipe. If you need to replace it, first open the upper filler cap, then drain all the oil by unscrewing the appropriate drain bolt located at the bottom. Once this is done, you can unscrew the filter, insert oil into it, and screw it back into its housing. Finally, proceed to add new oil into the system.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Explorer (2020-2026 / U625, MK 6) The oil light on the Ford Explorer can be reset using only the buttons on the right side of the steering wheel, without the need for a computer. Here…
Ford Explorer (2011-2019 / MK 5, U502) To replace the cabin filter on the Ford Explorer, open the glove compartment located on the passenger side. Once opened, loosen the screws inside so …
Ford Explorer (1991-1994 / MK 1, Un46) To change the engine oil in a Ford Explorer, you need to have a container for collecting the oil and place it under the sump. Now, unscrew the plug l…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos