Do it yourself
| ||||
|
Ford Expedition - Video tutorial
Model: Ford Expedition
U553
- Years 2018-2024 The guide shows how to remove the spare wheel of the Ford Expedition u553. The first step is to secure the vehicle and open the lower panel of the trunk. Remove the jack and the bag containing the tools. Take the winch handle from the bag and insert it into the hole in the vehicle's floor; turn it counterclockwise to lower the spare wheel. Remove the locking pin of the cable from the rim and remove the wheel from the bottom of the vehicle. To reassemble the wheel, follow the same steps in reverse. Check the tightness of the piece.
Posted on 9 May 2023 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.015
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |