Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Key Battery on the Ford Ranger

Model: Ford Ranger T6, P375, PX - Years 2011-2023
Part: Key

Want to DIY and replace the key battery for your vehicle? The instructions and procedure to follow are outlined below. First, obtain a pointed object to pry open the side of the key to remove the cover. Once detached, you will find the compartment containing the battery. Using the same pointed object, remove the old battery and replace it with the new one, ensuring the positive terminal is facing upwards. Then, take the cover again and position it back to snap it into place, and you're done.

Updated on 27 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Key Battery of the Ford Ranger
How to Change the Key Battery of the Ford Ranger
Ford Ranger (1998-2011 / MK 3) In this article, you will see how to replace the battery of the Ford Ranger key. For this operation, you will need a CR2032 battery and a small flath…
How to Change the Key Remote Battery on a Ford Ranger
How to Change the Key Remote Battery on a Ford Ranger
Ford Ranger (2011-2023 / T6, P375, PX) To change the battery of the key remote for a Ford Ranger, first press the unlock button and extract the emergency mechanical key. In the gap left, i…
How to replace the battery of the Ford Ranger key
How to replace the battery of the Ford Ranger key
Ford Ranger (2022-2026 / P703, RA) If you do not know how to properly replace the battery in the key of your latest model Ford Ranger, do not worry because in the following guide you w…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos