Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Check Correct Tyre Inflation Pressure

Model: Ford Focus MK 1 - Years 1998-2004
Part: Checks and maintenance

The correct inflation pressure of the tyres is essential to ensure grip and uniform tyre wear, not to mention the impact this parameter has on fuel consumption. Once you have checked the size of the installed tyres, you will find a table inside the passenger door pillar that indicates the inflation pressure value based on both the tyre size and the vehicle's load conditions. Remember to check the tyre pressure when the tyres are cold (otherwise, there is a risk that the air has already expanded, making it difficult to obtain accurate readings).

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Reset Tyre Pressure Warning Light
Reset Tyre Pressure Warning Light
Ford Focus (2011-2018 / MK 3) When the tyre pressure warning light illuminates on the dashboard, it is likely that the inflation pressure of one or more tyres is incorrect or that…
How to reset the tyre pressure warning light on the Ford Focus?
How to reset the tyre pressure warning light on the Ford Focus?
Ford Focus (2011-2018 / MK 3) To reset the tyre pressure warning light on the Ford Focus, do not perform any operations with the buttons on the steering wheel or near the instrume…
How to reset the tyre pressure warning light on my Ford Focus?
How to reset the tyre pressure warning light on my Ford Focus?
Ford Focus (2018-2025 / MK 4) As you likely know, a flat tyre can detach or explode. If you are driving and the tyre pressure indicators on your Ford Focus illuminate, pull over q…

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 2004-2011 - Where is the outside temperature sensor of a Ford Focus located? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos